Carbide Liner Bushes
SIP TOOLS offers Carbide Bushes having eight times life, compared to normal Jig
Bushes. The main advantages of Carbide Bushes is substantial savings on down time
due to it's longer life.
As illustrated in the sketch, only liner is made out of carbide which is either press fitted or brazed in complicated, hardened to toughened body as per consumrer's requirements.
Sintered tungsten Carbide Bushes are imported from Extramet AG, Switzerland, one of the biggest and most modern factory.
As illustrated in the sketch, only liner is made out of carbide which is either press fitted or brazed in complicated, hardened to toughened body as per consumrer's requirements.
Sintered tungsten Carbide Bushes are imported from Extramet AG, Switzerland, one of the biggest and most modern factory.
Carbide Liner has following composition & Properties
Type EMT 210 | Compositions | Type EMT 100 | Compositions |
---|---|---|---|
Chemical Composition |
90% WC/TAC 10% Co. |
Chemical Composition |
94% WC/TAC 6% Co. |
Physical Data Density Hardness Transverse Rupture Strength |
14.65 g/cm3 1'550 HC 30 >3'770 N/nm2 |
Physical Data Density Hardness Transverse Rupture Strength |
4.95 g/cm3 Min.1'680 HV 30 Max.1'730 |
Common Properties
Porosity : Basic - porosity : < A02, Particular porosity : < B 02, C - porosity
: C 0
Structure : Average grain size : < 1 my very equal distribution.
Structure : Average grain size : < 1 my very equal distribution.